006- Adonis dress

Open Source - Zero Waste - Digital Sewing kit

 

CHARACTERISTICS

Modular wrap dress with a belt that can be tied at the front or back.

This pattern is not conventional. 

It was designed in 2019 by Mylène L'Orguilloux @milan_avjc with the first intention to provide alternatives for home sewers to better optimize fabric consumption and reduce the waste usually produced when cutting a garment. It therefore results in a rectangle jigsaw-like pattern where all the pieces fit together without producing any fabric scraps.

SKILL LEVEL

 

This sewing pattern is suitable for intermediate sewers and above.

It comes with a sew-along video recorded in English - subtitles available in French and English.

Before downloading the digital kit, you can watch the video tutorial on youtube.

SIZE RANGE

 

This digital kit is not size inclusive as it only comes in 8 sizes. To choose the one that will fit you best, please refer to the hips measurements below. Lucile (the model) is 171cm tall and wears a size T38.

006_Chart.jpg

We aim to revise this pattern and develop a wider size range. Hopefully this will be possible in 2022.

If you're interested in getting involved in pattern or fit testing, please get in touch.

SUPPLIES

 

Thread

Suggested fabric: This pattern has initially been designed for the use of linen fabric or fluid cotton. 

It is however possible to cut it in lighter fabric such has viscose or Tencel in order to add more fluidity in your silhouette.

Plain and patterned fabric are both possible.

If you want to use a patterned fabric there are a few elements to consider

◼ There are seams on the middle front and the middle back

◼ The pattern layout contains both straight grain and cross grain pieces.

◼ The pattern layout contains head to tail pieces.

 

This Zero Waste pattern is provided as ready-to-cut layouts with 3 cutting options explained in the set of instructions. Please consider the minimum cutting dimensions below when choosing your fabric: 

 

T34: 123 x 222cm

T36: 125 x 224cm

T38: 127 x 228cm

T40: 130 x 232cm

T42: 132 x 234cm

T44: 134x 238cm

T46: 136 x 242cm

T48: 138 x 246cm

MAKERS SPOTLIGHT

 

KIT CONTENT

 

◼ 1 printing test PDF

◼ 8 ready-to-cut pattern PDF layouts (one per size) in A4, A0, and US LETTER format

◼  1 set of printing & cutting instructions 

The digital kit comes as a zipped folder with the extension (.zip). 
To unzip all the contents of the zipped folder, press and hold (or right-click) the folder, select Extract All

FUNDING STATUS

 

Our open source pattern library access is managed through

Each month we monitor the number of downloads and donations to determine the current funding status. Once it reaches 100% the digital kit will be made available in the open source world forever. 

Downloads:  1156

Funding rate: 56% (€1592 out of €2846)

Last update on 2022, February 1st

DOWNLOAD OPTIONS

 

This digital kit isn't 100% funded yet. It will be soon!

In the meantime, you have 3 options to access it: 

1.png

Subscribe to our 

membership and get unlimited access to the full ZWDO's pattern library

Support

ZWDO Collective with a one-time donation 

as little as €1

3.png

Join the waitlist to be notified when it is 100% funded and becomes fully open source